Tuesday, 2 June 2020

My Secret Love - Notebook and Pen Holder

My Secret Love
Notebook and Pen Holder


I love the warm pinks and muted greens in these papers from Couture Creations "My Secret Love" collection.  I've used them to decorate a notebook holder, but this could be adapted to make an album or memory book - you might want to make the spine a little wider to accommodate the page attachments if you are making an album or memory book.  The one I've made is 5" x 7" with 1" depth at the spine.

Along with the beautiful papers I've use 300gsm white card (2 A4 sheets), some beige pearl card (3 A4 sheets) and some rainbow mirror card (2 A4 Sheets). 

The notebook I've used is A6  - 10.6cm x 15cm (European size), but there is room for a slightly larger notebook.

You'll need to use 2 sheets of 12" x 12" patterned paper, including covering you notebook to match the holder.  You may also want to snip out additional coordinating elements from your papers to add more decoration.

I've use the Couture Creations Mini Guillotine, the Couture Creations Scoring Board, the Couture Creations Mini Score Board and a small corner rounding punch. I've used pva glue applied sparing with a fine tip nozzle to stick my layers together, except when sticking the papers down onto the mirror card, where I have used double sided tape.

Please take a look at my video (link at bottom of page) to see which tools I've used and how I've used them.

Cut one of the A4 sheets of white card down to 11" x 7"  and score 5" in from each of the ends.  Burnish the folds to create the base of the notebook holder.  See my video for tips on doing this using a small scoring board.




Next cut enforcing pieces from the other sheet of white card.  The measurements for these are shown in the picture and they are slightly narrower than the spaces they will be stuck down in so that the fold lines are not covered.  You will need  2 pieces 4 15/16" x 7" and a strip for the spine 7/8" wide, but slightly longer than 7" - it is easier to cut this piece to length after it is stuck in place



If you want to have rounded corners on your holder or album, use the corner rounding punch on the 4 corners of the base piece and on the matching 2 corners on each of the reinforcement pieces before gluing them together.

Glue the reinforcement pieces down on the inside face of the cover, being careful not to cover the crease lines - as shown below.   Trim the piece reinforcing the spine to length after you have stuck in down.



The next thing to do is to decorate the front cover  - matting and layering with the patterned paper. It's easier to do this now, while you can open up the holder/album and work with it laying flat.



Next, add the base mat layers inside the holder. I've used the beige card for this.



Then cut to size the pieces needed to mat and layer the patterned paper with the mirror card and stick those together using double sided tape - but DO NOT stick them down inside the holder yet, as a strip needs to be added to hold the notebook in place.



Once the paper and mirror card are stuck together use them to score a 2" wide strip of card that will wrap around them.   Cut the strip to be 8" or 21cm (for A4 card)  long as you'll need approximately 1/2" at either end of the strip to fold behind this layer and stick it in place





Wrap the strip around the layer length ways about 1/2" from the left hand edge and stick in place with double sided tape - I've used high tack tape.



Then stick this layer down on the base layer inside the holder, on the right hand side.



For the left hand side, where there is a pen holder, you also need to prepare the layers of patterned paper and mirror card, but DO NOT stick them together.  Cut them to size and check that they would layer together - but the paper is going to be cut so that the bottom portion will cover the pen holder, and the top portion will be stuck down onto the mirror card.

For the pen holder, cut a strip of card 4 1/2" wide and 2" wider than your patterned paper - this will be approximately 6 1/2" wide - but do check how wide your patterned paper is.  I've used some of the beige card for this.

Score at 1/2" and 1" at one end of the card and then use the patterned paper to mark out the width of the pen holder and make a score line.  Then make 2 further score lines 1/2" apart.  Trim the card off at the furthest score line.



You also need to make score lines on one of the long edges at 1/2" and 1" from the edge - or in from the other edge.


Burnish all of the scored lines, and then cut away the card at the corners as shown.  I've cut a small "v" down the sides of the small flap that folds in to hold the sides in place.


Now cut the patterned paper into 2 pieces - make sure the bottom section is just the right size for the pen holder.   Instead of measuring you might want to stick the whole piece in place, glued to the front of the pen holder and then trim off along the top edge.


Stick the top half of the paper down on the mirror card.  If you want to add some elastic across the top half to help hold pens in place do this now, before sticking the mirror card down onto the inside of the front cover.



Add some double sided tape to the two flaps and fold the sides and bottom in and secure in place


Score a length of card at 1/2" spacing and fold and stick as shown - I've left a long section for a ruler or highlighter pen.  These partitions are strong enough to stop pens falling over, but can still be flexible enough to accommodate pens that are a little larger than 1/2".


Now you can fold in the bottom and side flaps and add double sided tape.


Now the pen holder can be stuck in place, inside the front cover.


I've also decorated my notebook to match with some more mirror card and patterned paper.

Here's my video showing how I've used some of the tools and giving you a look at my finished notebook holder.



Couture Creations Products Used
CO726343 - Mini Guillotine Trimmer
CO726342 - Scoring Board - 12 x 12 (inc bone folder and guide)
CO726752 - Mini Score Board - 8in x 6in
CO727587 - Collection Pack 12 x 12 - My Secret Love




Saturday, 23 May 2020

Sentiment Collage Card

Sentiment Collage Card


I made the background for this card using the Couture Creations Steampunk Dreams Sentiment stamp set.   I arranged a selection of the sentiments on my stamping platform so that I could stamp once, turn the card/paper 1/4 turn and then stamp again.  I stamped on a piece of card/paper 14.85cm x 14.85cm - an A5 piece of card cut down to a square.  After stamping I trimmed the card to 14cm square and added a mat layer.

While I had the stamps laid out on my stamping platform, I made a few backgrounds so I have several versions of this card.


This one is some blue inks on plain white card.  I've matted with navy blue card and then foiled the Steampunk Butterfly in silver on navy blue card.


For this one I stamped onto a piece cut from one of the 12"x12" papers from the Steampunk Dreams collection.  I've matted with some grey card and then used the same card for the butterfly.  The foiling on the butterfly is black and red.  I've doubled foiled with the 2nd layer being distressed to achieve a mottled/crackle effect.  I show you how to do this in my video.


To keep the butterfly's wings up I added some foam dots before sticking the butterfly down - they are only stuck to the butterfly and not to the card.



For this version of the card I stamped in some beige and red inks and used some dark red card as the mat and for the butterfly.  The butterfly on this card is also double foiled - this is the one made in my video.





Here's how I laid out the stamps - I kept them aligned so that when I rotated the card non of them would be upside down - they would either be the correct way up or vertical.





Couture Creations Products Used:

CO727724 - Cut & Create Die - Steampunk Dreams - Steampunk Butterfly
CO727719 - Stamp Set - Steampunk Dreams - Steampunk Sentiments Stamp Set
CO727708 - 12 x 12 Paper - Steampunk Dreams - Double Sided Patterned Papers 2
CO726073 - Foil - Heat Activated - Golden Cream (Light Mirror Finish)

CO725390 - Foil - Heat Activated - Deep Red (Mirror Finish)
CO725693 - Foil - Heat Activated - Midnight Black (Mirror Finish)
CO725691 - Foil - Heat Activated - Chocolate Copper (Mirror Finish)
CO726428 - Adhesive - 3D Foam - Black Dots



Wednesday, 13 May 2020

My Secret Love - Rose Topper Card

My Secret Love - Rose Topper Card


For this card I've used the "My Secret Love" stamp set to create a round topper.  I've used my stamp press to repeat stamp in various shades of pink and green, and then used the same inks with a water brush to colour in the stamped image.  I stamped and coloured my image before die cutting using a nesting die set.


The backing paper is cut from one of the 12x12 inch sheets in the collection, and this card uses just 1/4 of the sheet.  My card size is 14.8cm square - I have cut down an A5 card blank.

The backing paper is matted with layers of green and pink card, and I've cut a mat for my circular topper from the same pink card.

For the sentiment I've used the "Lovely Tags" Cut and Create die set.  I've foiled one of the tags using Rose Gold foil and stamped my sentiment, from the "Forever Yours" mini stamp set,  in black ink. To foil the tag I've used my GoPress & Foil with the Couture Creations Conversion Plate.


I used the Hovering Butterfly Cut and Create die to cut and foil the butterfly.  I've also used rose gold foil for this and then coloured using the same inks used on the rose topper.


My video shows how the card is put together and how I coloured the butterfly.



Couture Creations Products Used:

CO727629 - Cut and Create Die - My Secret Love - Hovering Butterfly
CO727631 - Cut and Create Die - My Secret Love - Lovely Tags Set (2pc)
CO727589 - Double Sided Patterned Paper - My Secret Love - Paper 1 (5pc)  or
CO727587 - Collection Pack 12 x 12 - My Secret Love
CO727625 - Mini Stamp - My Secret Love - You and Me mini sentiment set
CO727602 - Stamp and Die set - My Secret Love