Diamond Panel Coffee Break Card

For this card I've started with a square card base 14.8cm square (cut down from an A5 card blank).  This is just a little smaller than a 6" square card blank.

The front of the card base is folded in half to create the flap that the diamond is attached to.  The diamond is really just a square mounted with its points on the fold line.

The decorative papers, stamp and die are from Couture Creations Blooming Friendship collection. I've also used some dark grey card and white card.

I've used the Floral Mosaic, stamped 4 times to create the impression of a mosaic tiled floor.  It's very important that the square panel does not measure more from corner to corner (across the middle) than the height of your card base.  For my card base (14.8cm square) I used a square of card 10.1cm square.

The panel is mounted on the card front, on the left side only, using foam pads. I've tucked some of the red flowers from the ephemera pack under the edges of the diamond and then added some of the blue flowers overlapping the panel.

In the centre of the diamond I've used the Coffee Break mini die (cut from  dark grey card), mounted on a die cut white circle, matted onto a a circle cut from some dark grey card.

The inside of the card is also decorated with the patterned papers and has a sentiment cut from on of the papers using a circle die, matted onto a circle cut from white card.

The diamond panel hides the sentiment when the card is closed.

In my video I show you how to  use repeat stamping on the diamond panel - you will need to use a stamping platform (Stamp Press) for this.

Couture Creations Products

CO728126 - Mini Stamp - Blooming Friendship - Floral Mosaic

CO728117 - Mini Die - Blooming Friendship - Coffee Break

CO728099 - Collection Pack - Blooming Friendship - Papers, Ephemera, postcards and stickers

  OR 

CO728105 - Paper 12 x 12 Double Sided - Blooming Friendship - Sheet 5

CO728107 - Diecut Ephemea Set - Blooming Friendship

CO728101 - 12 x 12 Double Sided - Blooming Friendship - Sheet 1

CO727381 - Precision Stamp Press

 Blooming Friendship Cards

For these cards I've used the beautiful papers from Couture Creations Blooming Friendship collection. 

The backgrounds for both cards are made from one of the 12"x12" sheets, and I've also used sentiments from the sentiment panel 12"x12" sheet and the ephemera pack.

This card is made from the bottom half of the 12x12 sheet.  The bottom left corner is used for the main background and the reverse side of the bottom right corner is used as the backing layer - to create the red border.  My card base is 14.8cm square (cut down to a square from an A5 card blank) so I've cut the red layer to 14.4cm square and the piece for the main background to 14cm square.  

I've added some foiling to the background paper using the crackle die - I show you how to do this in my video.

Before sticking the layers down, gut the middle from the red piece using either a square die or a paper trimmer (the type with blades that slide in a groove).  The cut out piece is used to make the label the die cut is mounted on, and to make flowers for the other card.

I've used the Coffee Break die cut, and mounted it on a label cut from the red side of the paper.  For the label I've used one of the Modern Essentials  Cut, Foil and Emboss die sets - Nesting Inset Ovals, but you could use a plain oval die. 

The sentiment is from the ephemera pack.   I've added some ink around the edges to make it stand out from the background - I've used Card Deco Pearlescent Pigment Ink in Brown.

The second card is made using the top half of the 12"x12" sheet, with a sentiment cut from the sentiment sheet.  I've trimmed it out and then used another of the Modern Essential Cut, Foil and Emboss die sets (Bracket Frames) to die cut and foil it.

Cut the floral piece for the left hand side first  - approximately 5cm wide.  Leave trimming this piece to length until after it is stuck in place.

Turn the paper over to the red side and cut a piece to 14.3cm square (so there will be a small border of your card blank showing)

Line the floral strip up at the left hand edge of the red paper.  I've added a lacy die cut tucked under the edge of the floral strip, but you could use some actual lace.

Stick these in place lined up with the left hand edge, and then turn the assembled piece over and trim off the excess of the lace and floral panel at the back using scissors.

Once the background has been stuck down on the card base, add the sentiment panel and flowers.

The red flowers are die cut from the red side of any odd pieces of the paper and then I've added some Christmas Red Card Deco Pearlescent Pigment Ink which gives them a lovely sheen.  For the blue flowers I've used some pale blue paper and shaded with Navy Blue Card Deco Pearlescent Pigment Ink.  I show you how to shade the flower petals in my video.  

I've added some veining to the petals using a white gel pen.

In my video I show you how to foil using the crackle die, use the inks to shade the edges of sentiments and flowers, and how to put the cards together.

Couture Creations Products:

CO728099 - Collection Pack - Blooming Friendship - 12x12 sheets, postcards and stickers

or

CO728104 - 12 x 12 inch Double Sided Paper - Blooming Friendship - Sheet 24 (5pc)

CO728105 - 12 x 12 inch Double Sided Paper - Blooming Friendship - Sheet 5 (5pc)

CO728107 - Diecut Ephemera Set - Blooming Friendship (58pc)

CO723973 - Couture Creations Paper Trimmer

CO725694 - Foil - Rose Gold (Vintage Matte Finish) - Heat Activated

CO728111 - Mini Die - Blooming Friendship - Crackle

CO728117 - Mini Die - Blooming Friendship - Coffee Break

CDEIPL024 - Fast Drying Pigment Ink - Card Deco Essentials - Pearlescent Brown

CDEIPL006 - Fast Dryine Pigment Ink - Card Deco Essentials - Pearlescent Navy Blue

CDEIPL004 - Fast Dryine Pigment Ink - Card Deco Essentials - Pearlescent Christmas Red

Foiled Christmas Crackers

You'll need to either use my Cracker Template or a Cracker die if you have one.

Download the template for the size card you have.  You can then print onto thick paper.  For the crackers, thick paper works better than card.  The paper you print on will eventually be covered by patterned card  or paper.  

A4 Cracker Template

US Letter Cracker Template

You will also need 5 paper clips to help hold things in place while card is shaped and glue dries.

I show you how to use the template, foil panels and assemble the cracker in my video.  The instructions below will probably make more sense if you watch the video first. 

Fold the printed template along the middle of the diamonds and then cut the grey diamonds out of the card.  

With the paper folded along the bases of the grey triangles, cut the grey triangles out, cutting through both layers of the paper.

At the ends of each row of triangles cut in from the edges of the paper - this creates the overlap for gluing the cracker together.

If you are printing on A4 paper you will have some extra card at the right hand end - trim at this end so that the overall length is 11 inches  This should give you 1 3/4" between the tips of the diamonds and the ends of the cracker - check that both ends are the same. 

Next score lines along the tips of the diamonds you have cut out, and fold so that the back along these lines.  This gives you the base for your cracker.   It needs to be decorated before the edges are stuck together.  For now just bring the edges together and hold them in place with paper clips so that the paper gets used to being curved - it will make the final assembly easier - see the video.

Cut pieces of coloured card or decorative papers to fit the edges and middle sections of the cracker.  As printers vary, and you might be using a cracker die, it's best you check how wide these need to be on your cracker.  If you are foiling these pieces then foil all of them before starting to stick them onto the cracker base - see video.

I've found it best to stick one of the short edges of each peace to the cracker base with double sided tape and use wet paper craft glue on other areas, leaving the other short edge, to about 1/2" from the edge, without glue.  With the glue still wet curve the ends of the cracker together and smooth down the decorative paper. - Once the glue has grabbed add glue to the other end of the piece on both inside faces of the cracker base and the decorative paper. Slide the end stuck with double sided tape between the cracker base and the decorative paper and hold in place until the glue has grabbed.   You can use paper clips on the cracker ends until the glue dries.

Here are some of the foil stamps I mention in my video - they are just suggestions for decorating the panels.

I can't tell you where you can buy any of the products.